Skip to main content

3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch

3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch
3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch 3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch 3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch



New toy for makers who want to build their own smart home system 
 
Overview:
 
The wireless switch supports inching /self-locking mode. You can add the device to the APP eWeLink to remote control connected home appliances or devices. In self-locking mode, you can remote turn on/off connected devices immediately. When in inching mode, you have two wiring ways to select, whether turn on 1s and then auto-off or turn off 1s and then auto-on.
Remote control by APP EweLink for iOS and Android. Supported functions include remote on/off, timing schedules, device sharing, group management.
The self-lock/inching mode wireless switch has two power supply specification: 5V. No matter which specification you select, they have the same functions.

Feature:
 
There are two working modes for the module: inching mode and self-locking mode. Press the self-lock/inching mode button to switch between these two modes.
When your module is switched to self-locking mode, you can turn on/off the connected appliance instantly. There is two wiring way.
When your module is switched to inching mode, you can press on/off toggle button to turn on or off connected device. There are two kinds of wiring way.
The first wiring way is to connect COM and NO with an appliance. In this way, when you press the setting button or APP to turn on, the connected appliance will be turned on for 1s and then auto turned off.
The second wiring way is to connect NC and COM with an appliance. In this way, when you press the setting button or APP to turn off, the connected appliance will be turned off for 1s and then auto turned on.
 
LED Indicator:
 
There are 3 LEDs, the led beside self-lock/inching mode button indicates the working mode(on: self-locking mode, off: inching mode).
The one beside on/off setting button indicates wifi status(enter pairing status: long press the setting button until led fast blink).
Another one below the relay indicates relay on or off status(on: turn on the connected device, off: turn off connected device).
 
Add device to eWeLink:
 
Long press the setting button until the LED beside on/off setting button fast blinking.
1. Android: Add Device->select pairing method according to how the LED blinks->enter WiFi name and password->pairing and register->name device
2. iOS: go to phone setting->WiFi-> select the WiFi starts with ITEAD-********, enter default password to connect:12345678-> go to eWeLink->Add device->->select pairing method according how the LED blinks->enter WiFi name and password->pairing and register->name device
 
Specification:
 
Dimension:70.5mm*27.4mm*23mm
Operating current: 5V DC 
Leds: indicate working mode, wifi status, relay on/off status.
Two input interface 
Board consumption: <1W
Standby current: 80mA
Max input current: 10A
Support to control different voltage range 
Relay lifespan: more than one million times
100M electrical insulation resistance
Electric shock voltage: 1000V
Relay maximum pull time: 15ms
Relay maximum release time: 5ms
Operating temperature: -40 degrees to +70 degrees
Operating Humidity 40% ~ 80% RH
 
Application:
 
The switch can be applied to access control, turn on PC, garage door, etc.

Package includes:

3 x Module





3pcs 5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch See detail


Popular posts from this blog

BGA152 BGA132 BGA136 TSOP48 NAND Flash USB 3.0 U Disk PCB IS917 Main Controller Without Flash Memory for Recycle SSD Flash Chips

Get BGA152 BGA132 BGA136 TSOP48 NAND Flash USB 3.0 U Disk PCB IS917 Main Controller Without Flash Memory for Recycle SSD Flash Chips null Please download software here: IS917     Specifications: Main Controller IC : IS917  USB type: USB3.0  PCB size:14*33mm(without the USB port size) Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)  Usage:(USB3.0 interface High speed) NAND flash R/W Strick  Can be delete all partition  Can be Read & Write   Q&A: 1. support those chips? Except the latest UFS2.0 chip, other conventional chips are supported; 2. USB2.0 and USB3.0 U disk difference?  USB2.0 slow, only support single-sided paste, 3.0 speed fast, support double-sided paste, the current only BGA152/132/136 TOP48; 3. Why my chip after welding, no display, detection voltage is zero red light?  May be the problem, one is the chip is broken; two may be welding is not good, there is t...

3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC

Get 3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC Features:   - Infrared illuminator board for CCTV security cameras - Replace a camera LED board for your broken or worn out IR LED board - Bright infrared LEDs without much energy consume - Suitable for camera shell of 50mm diameter - Number of IR Lamp:   850nm   48 LED F5 (F5: LED bulb diameter: 5mm) - Voltage: 12V DC - Board Diameter: 53mm    Package Included:   3 x 48*LED 850nm Illuminator IR Infrared Light Board 3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC See detail

YL160 4-in-1 Magnetic Stripe Credit Card EMV IC Chip RFID PSAM Card Reader Writer Duplicator

Get YL160 4-in-1 Magnetic Stripe Credit Card EMV IC Chip RFID PSAM Card Reader Writer Duplicator Features : POST, USB powered Compatible with EMV4.3/PBOC3.0 specification support multi-functional PSAM operation LED light prompt data transmission process .Long Service Life Magnetic Head Support the function of the SAM card operation Use USB to communication with PC Thin, light, beautiful, practical Support magnetic /IC chips /13.56mhz RFID NFC /PSAM cards USB interface, plug and play, no need to install additional drivers USB interface, truly plug and play, no need to install drivers Read magnetic cards, IC card reader, proximity card function Reading the full three-track magnetic card, support bi-directional swipe Provide many development platform interface function and application example Support Windows 7, Windows 8, Win2008, Windows 2003, Windows 2000, XP, Linux, etc Can read&write a variety of memory card and supports T...