Skip to main content

3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino

3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino
3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino 3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino 3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino



Features:
 
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC. GND. TXD. RXD foot for the Bluetooth
With "Research" button(ON/OFF/WAKE foot for it, external MCU output "High level" can control module to research)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55 x 3.98cm
 
Specification:
 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built-in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0+EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: about 21.5cm
Item size: about 3.5 * 1.5 cm
Item weight: 7g
Package weight: 9g
 
Note:
 
input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply reversing function", so please correctly connect the power supply
We advise installing "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function "
 
Package includes:
 
3 x bluetooth Module
















3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino See detail


Popular posts from this blog

BGA152 BGA132 BGA136 TSOP48 NAND Flash USB 3.0 U Disk PCB IS917 Main Controller Without Flash Memory for Recycle SSD Flash Chips

Get BGA152 BGA132 BGA136 TSOP48 NAND Flash USB 3.0 U Disk PCB IS917 Main Controller Without Flash Memory for Recycle SSD Flash Chips null Please download software here: IS917     Specifications: Main Controller IC : IS917  USB type: USB3.0  PCB size:14*33mm(without the USB port size) Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)  Usage:(USB3.0 interface High speed) NAND flash R/W Strick  Can be delete all partition  Can be Read & Write   Q&A: 1. support those chips? Except the latest UFS2.0 chip, other conventional chips are supported; 2. USB2.0 and USB3.0 U disk difference?  USB2.0 slow, only support single-sided paste, 3.0 speed fast, support double-sided paste, the current only BGA152/132/136 TOP48; 3. Why my chip after welding, no display, detection voltage is zero red light?  May be the problem, one is the chip is broken; two may be welding is not good, there is t...

3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC

Get 3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC Features:   - Infrared illuminator board for CCTV security cameras - Replace a camera LED board for your broken or worn out IR LED board - Bright infrared LEDs without much energy consume - Suitable for camera shell of 50mm diameter - Number of IR Lamp:   850nm   48 LED F5 (F5: LED bulb diameter: 5mm) - Voltage: 12V DC - Board Diameter: 53mm    Package Included:   3 x 48*LED 850nm Illuminator IR Infrared Light Board 3pcs 48*LED 850nm Illuminator IR Infrared Light Board Night Vision for CCTV Camera 12V DC See detail

YL160 4-in-1 Magnetic Stripe Credit Card EMV IC Chip RFID PSAM Card Reader Writer Duplicator

Get YL160 4-in-1 Magnetic Stripe Credit Card EMV IC Chip RFID PSAM Card Reader Writer Duplicator Features : POST, USB powered Compatible with EMV4.3/PBOC3.0 specification support multi-functional PSAM operation LED light prompt data transmission process .Long Service Life Magnetic Head Support the function of the SAM card operation Use USB to communication with PC Thin, light, beautiful, practical Support magnetic /IC chips /13.56mhz RFID NFC /PSAM cards USB interface, plug and play, no need to install additional drivers USB interface, truly plug and play, no need to install drivers Read magnetic cards, IC card reader, proximity card function Reading the full three-track magnetic card, support bi-directional swipe Provide many development platform interface function and application example Support Windows 7, Windows 8, Win2008, Windows 2003, Windows 2000, XP, Linux, etc Can read&write a variety of memory card and supports T...