3pcs NRF51822 Beacon Module Bluetooth RSSI Positioning Module Geekcreit for Arduino - products that work with official Arduino boards

Get 3pcs NRF51822 Beacon Module Bluetooth RSSI Positioning Module Geekcreit for Arduino - products that work with official Arduino boards

Introduction and features:

 

1. Easy and fast customization of extremely low cost enclosures;

2. UUID, Major, Minor and other parameters can be changed according to customer needs;

3. Beacon barcode for easy identification;

4. Based on TI's NorDic51822/CR2032, low power Bluetooth module;

5. Support IOS7.0, Android 4.3 and above;

6. Receiving: 30M;

7. Battery life is 6 months to one year.
8. Working voltage: 1.8-3.6V

Test conditions: Ta = 25 ° C, VCC = 3.3V.

Technical indicators	Parameter	Remarks
Operating Voltage	DC 2V to 3.6V
Working frequency	2402~2480MHz
Number of channels	40
Modulation	GFSK
Output Power	-20dBm ~4 dBm	Programmable preparation
Emission current	10.5mA	POWER is 0dBm, related to power
Receiving sensitivity	-91dBm	Dirty transmitter mode
Receiving current	13mA
Stand-by current	2.7uA	Stop broadcasting
Transmission rate	1Mbps
Chip flash	256KB
Chip RAM	16KB
Antenna form	PCB antenna
Communication distance	>30m	0dBm r
Storage temperature	-40 ~ 125 ° C
Operating temperature	-20 ~ 75 ° C
Dimensions	24mm*4.5mm

Note:

1 . The supply voltage of the module affects the transmit power. Within the operating voltage, the lower the voltage, the smaller the transmit power. Remarks:

2 . When the operating temperature of the module changes, the center frequency will change, as long as it does not exceed the operating temperature, it will not affect the application.

3 . The antenna has a great influence on the communication distance. Please install the module correctly.

4 . How the module is installed affects the communication distance.
 

Package includes:

3 x NRF51822 Beacon Module 

3pcs NRF51822 Beacon Module Bluetooth RSSI Positioning Module Geekcreit for Arduino - products that work with official Arduino boards See detail